91
III-2 Central AP Management
Such menu allows you to configure VigorAP device to be managed by Vigor router.
III-2-1 General Setup
Available settings are explained as follows:
Item Description
Enable AP
Management
Check the box to enable the function of AP Management (APM).
Enable Auto Provision VigorAP 802 can be controlled under Central AP Management in
Vigor2862 series. When both Vigor2862 series and VigorAP 802 have
such feature enabled, once VigorAP 802 is registered to Vigor2862
series, the WLAN profile pre-configured on Vigor2862 series will be
applied to VigorAP 802 immediately. Thus, it is not necessary to
configure VigorAP 802 separately.
Click OK to save these settings.
To Next Page
Loading...
Need help?
General
