Draytek VigorAP 802 - II-4-2 Mesh Status; II-4-3 Mesh Discovery

64
II-4-2 Mesh Status
This page shows general information for the VigorAP.
In which, hop 0 means this node will use Ethernet cable to join the mesh group while others use the
wireless link.
II-4-3 Mesh Discovery
This page helps discover all Mesh devices around and offer the Link Status and Operation Mode of
each Mesh device.
For obtaining the list of devices around this VigorAP, click Scan. Later, surrounding VigorAP device(s)
will be displayed on this page.