Draytek VigorAP 802 User Manual

93
III-2-3 Overload Management
Load Balance can help to distribute the traffic for all of the access points (e.g., VigorAP 802)
registered to Vigor router. Thus, the bandwidth will not be occupied by certain access points.
However, traffic overload might be occurred if too many wireless stations connected to VigorAP 802
for data incoming and outgoing. Therefore, “Force Overload Disassociation” is required to terminate
the network connection of the client’s station to release network traffic. When the function of “Force
Overload Disassociation” in web user interface of Vigor router (e.g., Vigor2860 or Vigor2925 series) is
enabled, wireless clients specified in black list of such web page will be disassociated to solve the
problem of traffic overload.
The following web page is used to configure white list and black list for wireless stations.
Available settings are explained as follows:
Item Description
White List/Black List Display the information (such as index number, MAC address and
comment) for all of the members in White List/Black List.
Wireless stations listed in Black List will be forcefully disconnected
first when traffic overload occurs and “Force Overload Disassociation”
is enabled.
Client’s MAC Address Specify the MAC Address of the remote/local client.
Apply to White List – MAC address listed inside Client’s MAC Address will be
categorized as one of members in White List.
Black List - MAC address listed inside Client’s MAC Address will be
categorized as one of members in Black List.

Draytek VigorAP 802 Specifications

General

Brand	Draytek
Model	VigorAP 802
Category	Wireless Access Point
Language	English