Draytek VigorAP 802 User Manual

60
II-4 Mesh Settings for Mesh Node Mode
When you choose Mesh Node as the operation mode, the Mesh menu with the settings of Mesh
Setup, Mesh Status, Mesh Discovery and Configuration Sync will be shown on the screen.
Please note that, within VigorMesh network,
 the total number allowed for mesh nodes is 8 (including the mesh root)
 the maximum number of hop is 3
Refer to the following figure:

Draytek VigorAP 802 Specifications

General

Brand	Draytek
Model	VigorAP 802
Category	Wireless Access Point
Language	English