EasyManuals Logo

Draytek VigorAP 802 User Manual

Draytek VigorAP 802
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
50
Open Wireless LAN (2.4GHz)>>Band Steering to get the following web page:
Available settings are explained as follows:
Item Description
Enable Band Steering If it is enabled, VigorAP will detect if the wireless client is capable of
dual-band or not within the time limit.
Check Time…. – If the wireless station does not have the capability of
5GHz network connection, the system shall wait and check for several
seconds (15 seconds, in default) to make the 2.4GHz network
connection. Specify the time limit for VigorAP to detect the wireless
client.
5GHz Minimum RSSI – The wireless station has the capability of 5GHz
network connection, yet the signal performance might not be
satisfied. Therefore, when the signal strength is below the value set
here while the wireless station connecting to VigorAP 802, VigorAP will
allow the client to connect to 2.4GHz network.
After finishing this web page configuration, please click OK to save the settings.

Table of Contents

Other manuals for Draytek VigorAP 802

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek VigorAP 802 and is the answer not in the manual?

Draytek VigorAP 802 Specifications

General IconGeneral
BrandDraytek
ModelVigorAP 802
CategoryWireless Access Point
LanguageEnglish

Related product manuals