21
NOTE: This option can only be programmed With T-Link Console software.
[033] Trouble Toggle Option Section 1
Option [033] and [034] are for the trouble reporting toggles. To enable, set the specific trouble
toggle option ON. To disable, set toggle to option OFF.
[034] Trouble Toggle Option Section 2
Toggle Default Description
[1] ON
|____________|
Network Trouble
[2] ON
|____________|
Invalid Account (set as FFFFFF)
[3] ON
|____________|
Receiver 1 Absent
[4] ON
|____________|
Panel Communication Trouble
[5] OFF
|____________|
Input Alarm
[6] *OFF
|____________|
FTC to Receiver 1
[7] *OFF
|____________|
PC5108 Absent
[8] *OFF
|____________|
PC5108 Tamper
*Must be ON for UL/ULC installations
Toggle Default Description
[1] OFF
|____________|
FTC to Receiver 2
[2] OFF
|____________|
Keyswitch Arm/Disarm Reporting
[3] OFF
|____________|
T-Link Remote Programming
[4] OFF
|____________|
T-Link Local Programming
[5] OFF
|____________|
Receiver 2 Absent
[6]-[8]
|____________|
For Future Use
To Next Page
Loading...
Need help?
General
