Insufficient Time!
There may be circumstances when the system will operate as intended, yet the occupants will not be protected from the emergency due to their inability to respond to the warnings in
a timely manner. If the system is monitored, the response may not occur in time to protect the occupants or their belongings.
• Component Failure
Although every effort has been made to make this system as reliable as possible, the system may fail to function as intended due to the failure of a component.
• Inadequate Testing
Most problems that would prevent an alarm system from operating as intended can be found by regular testing and maintenance. The complete system should be tested weekly and
immediately after a break-in, an attempted break-in, a fire, a storm, an earthquake, an accident, or any kind of construction activity inside or outside the premises. The testing should
include all sensing devices, keypads, consoles, alarm indicating devices and any other operational devices that are part of the system.!
•Security and Insurance
Regardless of its capabilities, an alarm system is not a substitute for property or life insurance. An alarm system also is not a substitute for property owners, renters, or other occupants
to act prudently to prevent or minimize the harmful effects of an emergency situation.
B. Trademarks and patents DSC, the DSC Touch name, and the DSC logo are trademarks of Tyco Safety Products of Canada Ltd..
You agree that all of DSC’s trademarks, trade names, service marks and other DSC logos and brand features, and product and service names are trademarks and the
property of Tyco Safety Products of Canada Ltd. (the "DSC Marks"). Without DSC’s prior permission, you agree not to display or use in any manner the DSC Marks. Trade
names used herein may be trademarks or registered trademarks of the manufacturers or sellers of the respective products.This Product and the use of this Product may be
covered by one or more patents.
C. Limited warranty.
Digital Security Controls warrants the original purchaser that for a period of twelve months from the date of purchase, the product shall be free of defects in materials and workmanship
under normal use. During the warranty period, Digital Security Controls shall, at its option, repair or replace any defective product upon return of the product to its factory, at no charge
for labour and materials. Any replacement and/or repaired parts are warranted for the remainder of the original warranty or ninety (90) days, whichever is longer. The original purchaser
must promptly notify Digital Security Controls in writing that there is defect in material or workmanship, such written notice to be received in all events prior to expiration of the
warranty period. There is absolutely no warranty on software and all software products are sold as a user license under the terms of the software license agreement included with the
product. The Customer assumes all responsibility for the proper selection, installation, operation and maintenance of any products purchased from DSC. Custom products are only
warranted to the extent that they do not function upon delivery. In such cases, DSC can replace or credit at its option.
To Next Page
Loading...
Need help?
General
