Installer Code Access
Master Code Access
Code to access all options.
Toggle whether or not to allow duress codes
Require user code to access camera app
When enabled, a code is required to delete disarm and image
sensor photos.
Require user code for arming panel. Note: this option shall be!
enabled for UL/cUL.
Refuse Arming When
Battery Low
Will not allow panel to arm if battery is low (below 30%)
Toggle whether or not to bypass open or tampered sensors!
automatically. Note: Not for use shall be disabled for UL/cUL.
If panel is armed “Away” but a delay door is not opened, the panel
assumes you are still home and changes arming to “Stay” mode
Arm stay immediately with no countdown timer
DSC Confidential and Proprietary Page of 60 114
© Last updated 4/29/15 All rights reserved
To Next Page
Loading...
Need help?
General
