DSC Touch-SCW9067

SYSTEM TESTS
WI-FI TEST
FIND IT
Settings
Wi-Fi Test
The Wi-Fi test checks the DSC Touch’s connection to your network. Before
running this test, be sure to connect the panel to the network. See
“customization” section for directions on connecting to Wi-Fi.
A successful test will result in a “pass” and indicates the date and time of the test.
To perform a Wi-Fi Test, touch the “Run” button.
Note: If test fails, please check your Wi-Fi settings.
System
Tests
Wi-Fi Test
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 68 114
© Last updated 4/29/15 All rights reserved