DSC Touch-SCW9067

INSTALLATION
UPGRADE SOFTWARE
FIND IT
Settings
Installation
Upgrade
Software
Setting
Description
Delete All Sensors and Devices
Erases all security sensors and Z-Wave devices from the panel.
Master Reset*
Erases all content and settings and restores panel to factory defaults
Reset Panel With Last Backup
Image*
The panel will be restored with the most recent backup image used.
Upgrade Using Network
Search the network for updates and install new software
IQ2 Panel Upgrade Using
Network
Search the network for updates and install new software for IQ2
secondary tablets paired with the primary
Upgrade Using SD Card
Search an inserted SD Card for updates and install new software
Patch Tag
A code corresponding to a specific software update on the server.
Automatic Upgrade
Allow the panel to update it’s software as new versions become available.
Note: For UL/cUL, automatic upgrade is not allowed.
Automatic Upgrade Interval
Determines interval DSC Touch will look for software updates. (Default 24
hrs)
Upgrade the panel software using Wifi, Cellular or an SD Card. Note: for UL/cUL,
remote software uploading is not allowed
Installer Code Access
Master Code Access
* Additional options available
only through the Dealer Code.