DSC Touch-SCW9067

System
Tests
Cellular
Test
SYSTEM TESTS
CELLULAR TEST
FIND IT
Settings
Cellular Test
Test the panel’s built-in cellular radio connection. You must first activate the
radio through alarm.com prior to this test.
To begin the test press
“Start” and watch for the
results on the screen.
OTASP
The OTASP function is used to register the built
in CDMA module with the Verizon network. This
should already have been completed at the
factory and if attempted will generate a pop up
warning. The OTASP option will not appear on a
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 70 114
© Last updated 4/29/15 All rights reserved