Add Device
Pair new devices
Edit Device
Make changes to existing devices
Clear Device
Clears or resets the memory of a Z-
Wave device. (Requires you touch the
“Pair” button on the device)
Delete Device From Panel
Remove a Z-Wave device from
the DSC Touch’s memory (does
not require you to have the device)
Remove All Devices
Delete all Z-Wave devices from
the DSC Touch’s memory
Home Control Devices
Add, Edit, Clear and remove Z-Wave peripherals in Home Control Devices.
Rediscover Network
Re-establishing connection to
devices on the Z-Wave network.
Installer Code Access
Master Code Access
Neighbor Info
Displays which neighboring Z-
Wave devices help establish a
connection to the panel.
Z-Wave Counters
Shows # Z-Wave commands by
category
DSC Confidential and Proprietary Page of 46 114
© Last updated 4/29/15 All rights reserved
For Supplementary Use Only, not Part of the Fire, CO and Security System.
To Next Page
Loading...
