DSC Touch-SCW9067

SYSTEM TESTS
HOME CONTROL TEST
FIND IT
Settings
System Tests
Home Control Test
Test the connection between the panel and enrolled Z-Wave devices to
ensure they are communicating properly.
Home Control
Test
Note: If a test fails, relocate device, change batteries and/or rediscover network.
To perform a Home Control Test, touch the “Run” button. A successful test will result in
a “Pass” and a time stamp.
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 72 114
© Last updated 4/29/15 All rights reserved