To load new images from an SD card:
1- Load photos* onto an SD Card
2- Insert the SD Card into the panel
3- Open the “Photo Frame” app
4- Press “Add Photos”
5- Choose “Replace All Photos” or
“Add New Photos”
6- Wait for the images to load
7- Once loaded, you can press “Play”
to test.
NOTE: Before removing the SD Card, go to
“Settings” then touch “System Settings”
then “SD Card” and select “Unmount”
SD Card Slot:
Left side of panel
behind bezel
Insert card with the label facing you
Card will slide all the way in.
To remove, push gently and card will spring out.
Photo requirements:
-JPEG
-800x480 pixels (or less)
-No larger than 1MB each
-No more than 20 images
-Saved in folder entitled
“Photos”
DSC Confidential and Proprietary Page of 81 114
© Last updated 4/29/15 All rights reserved
To Next Page
Loading...
