Wi-Fi Test
Test the panel’s connection to
the wireless (Wi-Fi) network
Sensor Test
Test the panel’s communication
with individual security sensors
Cellular Test
Test the panel’s connection to
the cellular network
Image Sensor Config
Test the panel’s connection to
Image Sensors
Home Control Test
Test the panel’s
communication with
individual Z-Wave devices
System Tests
There are several tests you can run to ensure the system is operating properly.
Installer Code Access
Master Code Access
Panel Test
Runs through a full diagnostic
of every panel system
DSC Confidential and Proprietary Page of 67 114
© Last updated 4/29/15 All rights reserved
IQ2 Devices Test
Runs a connectivity test with
connected IQ2 secondary
To Next Page
Loading...
