Installer Code Access
Master Code Access
When enabled, the range for entry and exit delays is as follows:!
-Entry delay: 30-240 seconds,Exit Delay: 45-254 seconds!
When disabled, the range for entry and exit delays are as follows:!
-Entry delay: 5 to 240 seconds, Exit delay: 5 to 254 seconds!
Note: for UL/cUL set entry delay to 45 sec. and for UL set exit delay to max 120 sec. and
for cUL set exit delay to 60 sec.
Select the temperature format. (Fahrenheit or Celsius)
Select a panel language. All settings and menus will change except
videos. (English, French and Spanish)
Select your favourite languages. This setting determines what 2
languages the bi-lingual toggle uses in the Apps section. Favourite 1
is the primary language on the panel, favourite 2 is the secondary
language. (English, French and Spanish)
Enable or Disable the ability to pair an IQ2 secondary panel.
When enabled the system can detect when an unusual amount of
RF signals are being transmitted leading to a potential panel
malfunction. This will report to the central station and handled
accordingly.
Jam Detection Local Alarm*
When enabled the system will sound a local alarm. “Jam Detection”
must be active for this to function properly.
* Additional options available
only through the Dealer Code.
To Next Page
Loading...
