MENUS AND FUNCTIONS
40 D-306232 WP8010/WP8030 V18 DSC EN USER
The display shows the currently selected option.
Click the or button until the display reads the event group
you wish to be reported via MMS, for example, [alarm].
14
When you are satisfied with the setting, press to confirm.
A "Happy Tune" ☺ sounds. The display confirms the set events to be
reported, and returns to step 14.
5, 15
C. To Program MMS and SMS Telephone Numbers
Continue from step 4 in section A. “To Program Events to be Reported by
SMS via the server”
Click the or button until the display reads the SMS/MMS
telephone number you wish to program or edit, for example, "2nd
SMS/MMS", and press .
When the display reads [Telephone num.], press
To program or edit the MMS/SMS number, at the blinking cursor position
enter the MMS/SMS telephone number, for example, “895283584”, using the
alphanumerical keypad.
6, 7
When done, press to confirm.
A "Happy Tune" ☺ sounds, the display confirms the MMS/SMS telephone
number and returns to step 19.
8, 15
Additional Information (section B.12)
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
This option allows you to program the events to be reported. To program telephone numbers, click the
or button until the display reads the desired option.
The display shows the currently selected option (indicated by a
symbol), for example, "
disable report
".
Using the or buttons you can now select the events you wish to be reported to private
telephones numbers according to the options provided in the tables below:
WP Panel
No message will be reported
No message will be reported
All messages, except arming & disarming
All messages, except alerts
Arming and disarming (Open/close) only
Note: “
all
” means all events including the L. BAT and AC FAIL trouble messages (WP Panel only).
To Next Page
Loading...
Need help?
General
