AUTOTUNE REMINDERS
Setting an autotune reminder will result in the decoder automatically tuning to the selected
programme when it starts.
Example : you can view a programme on M-Net and set an autotune reminder for the next
programme on the Movie Magic channel. When the programme on Movie Magic starts, a banner
will be displayed on-screen to remind you of your selection.
i
1. To set an autotune reminder, press to
display the i-plate.
2. Press the arrow to highlight the next
programme.
3. Press OK twice to set an autotune
reminder. A banner will appear on-screen
confirming your selection. A small
will also appear on the i-plate next to the
selected programme, indicating that an
autotune reminder has been set.
4. When the selected programme starts, a
banner will appear on-screen reminding
you of your selection. The banner will
countdown from 5 to 0. If you do nothing,
the decoder will automatically tune to the
selected programme. You can press EXIT
to remove the banner and remain on the
channel you are viewing.
Setting an Autotune
Banner Reminder
1. To cancel an autotune reminder, press
to display the i-plate.
2. A small will be displayed on the
programme for which you have set the
reminder.
3. Press the arrow to highlight that
programme.
4. Press OK once to cancel the autotune
reminder. A banner will appear on-screen
confirming that your reminder has
been cancelled.
i
Cancelling an Autotune
Banner Reminder
20 MultiChoice 933 Digital Satellite Decoder
To Next Page
Loading...