EasyManua.ls Logo

DStv MULTICHOICE 933 - Technical Specifications

DStv MULTICHOICE 933
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45MultiChoice 933 Digital Satellite Decoder
SPECIFICATIONS
CONDITIONAL ACCESS
CA System Embedded Irdeto
SOFTWARE
Loader Secure over-the-air or serial Irdeto loader
Middleware OpenTV
EPG Embedded surfer present/following/downloadable
OpenTV EEPG application
Menu/Graphic User Interface MCA surfer
VIDEO
DVB Standard MPEG2 MP @ ML
Video Format PAL
Video RAM Unified memory architecture, OSD support uses
processor RAM
Host supplier audio/video I & P frame support
Format conversion Pan & scan, letterbox, pillar box is optional
AUDIO
DVB Standard MPEG 2 layer 1 & 2 (Musicam),
sampling frequencies 32, 44, 1.48kHz
PROCESSOR
Host processor NEC EMMA 2 lite 225 MIPS
Flash Memory 4 Mbytes
Ram 16 Mbytes SDRAM
EEPROM 16k Bytes
FRONT PANEL
Display 4 digit, 7 segment display
Status indicaors 3 LEDs
Standby switch Hard reset when selected together withTV/Radio switch
TV/Radio switch Hard reset when selected together with Standby switch
Channel up/down Channel change
Volume up/down Mutes audio when selected together
Subscriber smart card ISO 7816
REAR PANEL
LNB Input (RF in) F-type - female no loop through
Base-band video CVBS (RCA)
Stereo audio Variable volume (2 x RCA), mono software selectable
Power jack Figure 8 socket, 85 to 288 VAC, 47-63-Hz, 0.3A
ACCESSORIES
Fly lead 3 RCA to RCA, 1.8m
Power Cord Molded 2 pin Euro plug, 1.8m
RCU Standard interactive
Batteries 2 AA size
Note: This decoder only provides an AV/RCA output interface.