DStv MULTICHOICE 933 - TV Installation Settings; Audio Output Selection

In this menu, you can adjust the Audio Output (stereo or mono). The PIN code for TV
INSTALLATION is 9949.
TV INSTALLATION
To access the TV Installation Menu :
1. Press MENU to access the Main Menu.
2. Using the arrow keys, highlight
Advanced Options and press OK.
The Advanced Options sub-menu is
displayed.
3. Select TV Installation and press OK.
4. To return to the Main Menu, press EXIT
twice.
5. To exit from all menus press MENU.
AUDIO OUTPUT
This feature allows you to select between stereo audio output and mono audio output.
Repeat steps 1 to 4 of TV Installation.
1. From the TV Installation sub-menu, select
Audio Output and press OK.
The Audio Output sub-menu is displayed
with the audio output set to Stereo. To
change this, press OK.
2. Use the arrows to change the Audio
Output to Mono and press OK.
3. Move the highlight to “Accept these
settings” and press OK to save your
changes.
4. To return to the Main Menu, press EXIT
twice.
5. To exit from all menus press MENU.
Note: Once Mono audio has been selected,
either the red or white audio connectors
can be used.
39
MultiChoice 933 Digital Satellite Decoder