E
16
Setting special function (vehicle model and units of
measurement)
The engine control unit transmits the correct vehicle
model and unit measurement information automatically
for the instrument panel to display. To force a change of
these parameters, turn the key from OFF to ON while
holding down both buttons (1, fig. 8) and (2, fig. 8).
Press the button (1) to scroll through available configurations.
To store your selection, hold down the button (2) for
5 seconds, until the word OFF appears on the display.
Set the key to OFF.
Notes
The dotted boxes in the figure are the display areas
for vehicle version (normal, R or S).
fig. 9
ProCarManuals.com
To Next Page
Loading...
