displayed. The new Riding Mode is confirmed
and stored only when brakes are released and
then the main screen is displayed.
●
If both of the above conditions occur, the
message "Close and release brakes" is
displayed. The new Riding Mode is confirmed
and stored only when both conditions are
satisfied and then the main screen is displayed.
If either of the conditions required to validate the
change of Riding Mode are not true within 5 seconds
from activation of one of the above-described
conditions, the procedure will be the
instrument panel will go back to displaying the main
page and no will be changed.
Ducati recommends changing the Riding Mode
when the motorcycle is stopped. If it is changed
while riding, be very careful (it is recommended to
change the Riding mode at a low speed).
116
To Next Page
Loading...
