To save charge, two conditions are
envisaged:
1) with engine running, if engine is turned but
instrument panel is still on, 30 seconds
suspensions are no longer powered;
2) with engine if instrument panel is turned on
but engine is still 30 seconds
suspensions are no longer powered.
Note
These suspensions, when not powered, are
hard due to the high hydraulic damping,
as it happens when bike is The transition from
powered suspensions to suspensions can be
perceived.
Note
With (bike suspension is hard as
valves, being not powered, keep hydraulic damping
at the minimum level.
120
To Next Page
Loading...
