Ducati MULTISTRADA V45 - Setting Menu - Riding Mode - Default

 menu – Riding Mode –
Default
This function allows restoring the values of the
parameters linked to the riding modes set by Ducati,
and is visible only if the parameters have been
previously modified.
Restoring the parameter values for a single
riding mode:
- Use the joystick to select  menu"
from the Interactive Menu and press ENTER.
- Select the "Riding Mode" item and press
ENTER.
- Select the riding mode you wish to customise
and press ENTER.
- Select the "Default" item and press ENTER. The
message Wait… is displayed for a few seconds
followed by the message Restored. Then
Default disappears from the menu list.
Engine
Suspension
DTC
Default
Preload
Fig 177
211