menu – Date and time
This function allows date and time as well as
the relevant formats.
- Use the joystick to select menu"
from the Interactive Menu and press ENTER.
- Select the Date and time item and press ENTER.
Set date, Date format, Set time and Time format
(Fig 205) are displayed. The currently set values are
shown on the right.
Using the joystick
it is possible to scroll and
select the parameter to set. Press ENTER to confirm.
Note
If the date or time has not been set yet, dashes
- are displayed instead of the relevant values.
Antitheft
Service
Date and time
Blind Spot Detection
Lap
Fig 204
Set time
Date format
Set date
06
/ /2020 01
Antitheft
Service
Date and time
Blind Spot…
Lap
Fig 205
229