menu – Backlight
This function allows adjusting the backlighting
intensity.
- Use the joystick to select menu"
from the Interactive Menu and press ENTER.
- Select the Backlight item and press ENTER.
Levels from 100% to 20% are displayed in the middle.
While the currently set level is shown on the right.
Using the joystick
it is possible to scroll and
select the desired mode. Press ENTER to confirm.
DRL
PIN Code
Backlight
Fuel indicator
Blind Spot Detection
Fig 188
100%
80%
100%
60%
DRL
PIN Code
Backlight
Fuel indicator
Blind Spot Detection
Fig 189
218