menu – Turn signals
This function allows user to set the turn indicators to
automatic mode or manual mode.
The turn indicator automatic strategy is
implemented based on calculation of leaning angle,
vehicle speed and run distance.
- Use the joystick to select menu"
from the Interactive Menu and press ENTER.
- Select the Turn signals item and press ENTER.
and are displayed in the
middle. While the current status of the function is
shown on the right.
Using the joystick
it is possible to scroll and
select the desired status. Press ENTER to confirm.
Note
In case of disconnection, the automatic
mode is set.
Bluetooth
Language
Turn signals
Tyre pressure
Measurement units
Fig 244
Auto-off
Auto-off
Manual-off
Bluetooth
Language
Turn signals
Tyre pressure
Measure...
Fig 245
252
To Next Page
Loading...
