Use the joystick to select the riding mode you
wish to customise and press ENTER.
The customisable parameters are the following:
- Engine
- DTC
- ABS
- DWC
- DQS
- Suspension
- Preload
- Default (visible only if one or more parameters
of the selected riding mode have been changed)
The motorbike is shown in the middle of the screen
with the relevant to the selected item
highlighted, press ENTER to modify the parameters.
Changes should only be made to the
parameters by people who are in motorcycle
set-up. If the parameters are changed accidentally,
use the "Default" function to restore factory
DTC
Preload
ABS
Engine
Default
Fig 159
184
To Next Page
Loading...
