using the pin code
(immobilizer override)
Key-On can be by pressing (7) on
the hands free unit (1) without the presence of the
keys (3) and (4) and entering the pin code on the
instrument panel.
can be by pressing (7) on
the Hands free unit (1).
each if the key is not present upon
next Key-On, the pin code must be entered. The pin
code is set by the customer upon delivery of the
motorcycle. The function is not enabled unless a pin
code has been set. When the Hands Free (7)
is pressed, the instrument panel activates the
backlighting and the display featuring the function
to allow the rider to enter the four-digit pin code.
Entering the correct pin turns on the instrument
panel and enables engine Pin code must be
entered within 120 seconds, which a
occurs automatically.
Fig 65
Fig 66
76
To Next Page
Loading...
