When accessing this function, the display will show
"N:" (NEW) followed by four flashing dashes "- - - -”
(A).
To exit the function without activating any PIN
CODE, press (2) for 2 seconds.
While if you press (4) with the 4 flashing
dashes “- - - -”, the page for PIN CODE entering will
be displayed.
Note
If upon accessing this function, the "O : " (Old)
indication is displayed together with four flashing
dashes "- - - -", a PIN code is already stored and the
Function is already active.
Entering the PIN CODE (B):
1) Only the first digit on the will flashing
with indicated the number “0”
2) Each time you press the (1) the displayed
number increases by one (+ 1) up to "9" and then
back from “0”
3) Each time you press the (2) the displayed
number decreases by one (- 1) up to "0" and then
back from "9"
Fig 95
113
To Next Page
Loading...
