Front brake lever
Pull in the lever (1) towards the twistgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently. The brake
lever has a dial adjuster (2) for adjusting the distance
between lever and twistgrip on the handlebar.
To adjust lever and change the distance between
lever (1) and twistgrip, keep the lever (1) fully
extended and turn knob (2) fully clockwise/counter
clockwise.
Before using these controls, thoroughly read
instructions under paragraph "Moving
Set front brake lever when motorcycle is
stopped.
Fig 35
57
To Next Page
Loading...
