Gear
This function displays the information relevant to
the vehicle gear.
If a gear is engaged, the displayed value may range
from 1 to 6, while if in neutral N is displayed and the
Neutral warning light turns on.
A dash “-” is displayed in these cases:
●
dash “-” and Neutral warning light flashing if the
instrument panel does not receive the gear
information;
●
dash “-” steady and Neutral warning light
flashing in case of fault;
●
dash “-” steady if gear information is not stable.
Note
If the display shows the dash steady on and the
Neutral light is then the gearbox could be in a
mechanically unstable position. until
the correct gear is indicated.
Fig 61
87