menu - Backlighting
regulation (BACKLIGHT)
This function allows adjusting the backlighting
intensity.
Enter the SETTING MENU.
Select “BACKLIGHT” option, by pressing (1)
and (2).
Once function is highlighted, press (4).
When entering this function, the instrument panel
will display the currently set value flashing (Fig 119).
With (1) and (2) it is possible to scroll and
select (flashing) the available “AUTO”,
“HIGH”, “MEDIUM”, “LOW”.
While user is scrolling the available the
instrument panel will change backlighting
accordingly.
To confirm the selected value, press (4).
The instrument panel will then set backlighting
according to the set value.
To quit the function press (2) for 2 seconds.
Fig 118
Fig 119
134
To Next Page
Loading...
