Duplo DC-6 - Slit, Cut, Crease Limitations

22
Before Preparing Document
Slit : Up to 6 slits are possible on one document.
Slit 1 and Slit 2 are for cutting the margins at both side edges.
Cut : Up to 25 cuts are possible on one document.
Crease : Up to 20 creases are possible on one document.
Slit / Cut / Crease Limitations
Slit 2 Slit 4 Slit 6 Slit 5 Slit 3 Slit 1
Cut 1
Crease 1
Cut 2
Cut 3
Crease 2
Cut 4
Lead margin:
3.0 mm–
Card length:
50.0 mm–
Center margin:
3.0 mm–
(
More margin may
be required
depending on
document
types.)
Trail margin:
5.0 mm–
Right margin:
3.2–55.0 mm
from the right edge
Gutter:
5.0–15.0 mm
Card width:
48.0 mm
3.2–55.0 mm
from the left edge
Left margin:
Document feed direction