12
Selecting (Setting) item
A3 Cov ASZ ∗ (Initial screen)
5555/7777(10) MC
Paper Size
A3
Select P.Size
A3 A4 B4 11X17 LGL LTR Cust1 Cust2 Cust3 A3SR ∗
Number Of Job
7777Set 10Sheet
Number Of Sets
7777
Input Sets No.
7777 ∗
Number Of Sheets
10
Input Sheets No.
10 ∗
Finisher Mode
Booklet Trimming
Staple/Fold Mode
Booklet
Select Job
Through Fold Booklet Side ST Corn.ST ∗
Trimming Mode ♦
Trimming
Select Job
Trimming Through ∗
4. CONTROL PANEL
(2) LCD map
The LCD map displays the hierarchy of the LCD in an easy to understand format.
Turning the jog dial switches the display within the same hierarchy, and press to move to the
hierarchy below (right side of the LCD map).
If no hierarchy exists below, turning the jog dial selects an item or sets a value. Pressing it confirms
the selected item or value set.
The ∗ mark indicates that items can be selected and values set by turning the jog dial.
Pressing the (Escape) button returns to the hierarchy above (left side of the LCD map). Pressing
for the number of hierarchies moved down from the initial screen returns to the initial screen.
(Pressing the start button to start the machine also returns to the initial screen.)
The items marked ♦ cannot be set (used) when the DBM-400 Sheet by Sheet is connected.
1.
2.
3.
4.
To Next Page
Loading...
