57
19. WHEN THE ERROR MESSAGE “Malfunction” IS DISPLAYED
When “Malfunction” is displayed in the first line of the LCD, perform the following procedure.
Remove any paper in the machine.
Open and close the upper door, lower door, or bridge door.
Turn off and then on the power.
If the error message does not go off even after performing the above, contact your dealer.
Please let the service personnel have the following information:
Your name (or the name of the company and person in charge), address, and telephone number
The model name: DSF-2000 (Sheet feeder)
Product number
The message displayed in the second line of the display
Product number
To Next Page
Loading...
Need help?
General