33
Press the (Escape) button to return to the initial screen. The paper size selected will be
displayed at the top left of the initial screen.
3
A3 MSZ
5555/7777(1O)
NOTE : Some paper sizes cannot be set according to the “Finisher Mode” set. Refer to the following table.
Finisher Mode
Booklet, Fold, Through
Side ST, Corn.ST
All
A4, LTR, (Cust1 to Cust3)
Settable Paper Size
∗ If the “Finisher Mode” is set to “Side ST” or “Corn.ST”, A4 and LTR paper will be conveyed horizontally.
∗ Custom size can only be set if processable paper sizes are set.
∗ For details on processable paper sizes, refer to the DBM-120 Sheet by Sheet instruction manual.
11. SETTING THE PAPER SIZE
When connecting the DBM-120 Sheet by Sheet
When connecting the DBM-400 Sheet by Sheet
Finisher Mode
Booklet, Fold
Side ST, Corn.ST
A3, A4, 11 × 17, LTR, A3SR, Cust1 to Cust3
Cust1 to Cust3
Settable Paper Size
∗ Custom size can only be set if processable paper sizes are set.
∗ For details on processable paper sizes, refer to the DBM-400 Sheet by Sheet instruction manual.
To Next Page
Loading...
Need help?
General