- 49 -
Troubleshooting
6
--- WAIT ---
MASTER MAKING
Printer is not ready. Please wait with the power
on. If the message remains after a few minutes,
turn the power off and contact your service
person.
Appears while platemaking is in progress. Please
wait until platemaking is finished.
-- PRINTING --
Appears if you press while printing is not
finished. Please finish printing. When you want
to make a plate, press
CLEAR
and then
PLATEMAKING
.
PLS MAKE MASTER
Execute platemaking. Appears after you press
PRINT
and
TEST-PRINT
in the
following situations:
q
when in confidential
safeguard mode, or
w
right after master set
error, or
e
right after distribution error.
SET KEYCARD
Insert the card into the keycard counter. If you
do not insert the card while the keycard counter
is connected, the printer cannot be operated.
To Next Page
Loading...
