65
9. VARIOUS SETTINGS
❊ Kicker Settings (Kicker is Optional)
Press the [Kicker key]. ( Refer to page 63 “9-3.
Accessory Menus”.)
1
Select the kicker operations On or Off.
Pressing the [Switching key] switches between the
On and Off display.
2
Enter the number of booklets to be sorted by the
kicker.
This can be selected between 0 and 999.
Pressing the box with a value displayed blinks the box
and resets the value to “0”. Enter the desired value
using the [Numerical keys], and press the [Return
key] on the numerical pad. The box stops blinking and
the value is confirmed. Pressing the box while entering
the value returns to the original value.
Pressing the [Back key] returns to the Accessory
Menu.
1
2
Back key
Switching key
999
<Kicker Setting> Screen
❊ Stacker Settings
1
2
Back key
<Stacker Setting> Screen
Press the [Stacker key]. ( Refer to “9-3. Accessory
Menu” on page 63.)
1
Adjust the start timing of the conveyance belt.
The standard setting is 0.
The start timing can be selected between 0 and 9
using the [
/ keys].
Increasing the value sets a slower timing for
conveyance to start.
This applies also when the trimmer is connected.
2
Adjust the stacker conveyance time.
The standard setting is 3.
The stacker conveyance time can be selected between
1 and 9 using the [
/ keys]. Increasing the value
sets a longer conveyance time, and decreasing sets a
shorter time.
This applies also when the trimmer is connected.
Pressing the [Back key] returns to the Accessory
Menu.
The optional settings still remain effective even though the power is shut off.
To memorize these settings, start this machine and stop once.
The contents of each option setting is effective on all memory numbers.
The optional settings still remain effective even though the power is shut off.
To memorize these settings, start this machine and stop once.
The contents of each option setting is effective on all memory numbers.
To Next Page
Loading...
Need help?
General