106
Specifications
DC-618 Rotary Tool Module
Model name RTM-08 DC-618 Rotary Tool Module
Module type Customer replaceable module
Paper weight
Perforation: 110–400 gsm
Micro-perforation tool: 110–180 gsm
Score: 110–400 gsm
* Laminated / UV coated stock within the above range including
lamination/coating layer.
Paper type
Uncoated, Coated, Laminated (laminate thickness: 10 μ or less),
UV coated
Module slot
Slot 2 and/or Slot 3
* When using 1×RTM-08 only, RTM-08 is used on Slot 2 (OMK-13 is
required on DC-618).
* When using RTM-08/PFM-04/CPM-08 on Slot2, RTM-08 can be
used on Slot 3. (OMK-13 and OMK-14 are required on DC-618.)
Rotary tool in 1 module 2
Position setup
Automatic
* Image shift compensation by reading REG mark is available.
Skip perforation Yes (2 tools in 1 module skip at the same time)
Max partial perforation 6 (in 1 widthwise position by 1 tool)
Programmable widthwise
position
2 per 1 tool
Tool position
Minimum distance from the side edge of documents: 5 mm
Minimum distance from the slit positions: 5 mm
Minimum distances
between the tools
48 mm
Depth adjustment Manual
RTM tools spec Perforation Cut: 0.6 mm / Tie: 0.6 mm (21.2 TPI)
Micro-perforation Cut: 0.28 mm / Tie: 0.23 mm (49.8 TPI)
Score Male: 0.8 mm / Female: 1.2 mm
Tool replacement Customer replaceable tools
* Replaceable with Perforation, Micro-perforation, and Score tool
Dimension In use 455 (W) × 95 (D) × 205 (H) mm
When packed 640 (W) × 160 (D) × 330 (H) mm
Weight Net 7.0 kg
Gross 8.5 kg
● Other specifi cations comply with the specifi cations on DC-618.
● The specifi cations are subject to change without prior notice.
To Next Page
Loading...