Duplo RTM-08 - Page 16

8
How to Replace a Rotary Tool
REFERENCE
REFERENCE
REFERENCE
Turn the
adjustment knobs
counterclockwise until
they stop to separate the
rotary tools
and the
lower
tools
.
Remove the four
hexagon socket head cap screws
(left unit: 2 pcs., right unit: 2 pcs.) to detach the
guide
L
and the
guide R
.
Use the hexagon wrench that came with the
DC-618.
Remove the two
hand knobs
(unit L: 1 pce., unit R: 1
pce.).
Do not lose the
hand knobs
.
Remove the
collar
. While raising the
lever
(
1
),
remove the
rotary tool
(
2
). (on both sides)
● Do not hold the cutting edge when removing the
rotary tool
.
● When removing the
rotary tool
, be careful not to
bring it into contact with the
lower tool
to avoid
damaging it.
IMPORTANT
Guide L Guide R
Hand knob
Rotary tool
Lower tool
Adjustment
knob
Adjustment
knob
Lever
1
2