5 | Product description
32
D-LX 201/721
D-LX 200
D-LX 201
D-LX 720
D-LX 721
Item no. Figure Name/description
Ex Ex
1 114 131 D-ZS 141-12
Ex connection terminal box for flame sensor; zone 1,
II 2 G Ex e IIC T6 Gb, IP65, 12-pin
1 108 948 D-ZS 117-I
heat insulator with potential separation and
G 1¼" threaded connection
1 101 525 D-ZS 118
optical adjustment aid for aligning the swivel mount
onto the sighting tubes; M72 outer thread
1 115 263 D-ZS 150
interface converter for connecting a RS-485 device to
a USB port, configuration via DIL switch, with status
LEDs, incl. pluggable screw terminal and USB cable
1 101 528
1 114 329
Light strip indicator for showing the flame intensity
(19" system), 3HE/3TE, IP00
D-ZS 129-30:
24V
D-ZS 129-40:
110—240 V~
1 114 314
./. Tropicalised printed circuit board painting
./. D-LX 201 InformationCentre
is a software system for
displaying and storing the data recorded by the flame
monitor in order to adjust the flame monitor in an ac-
curate and time-saving manner. Or customer service
department can provide the D-LX 201 Information-
Centre free of charge.
4012219
./.
Licence
for activating the flame stability signal
To Next Page
Loading...
Need help?
General
