DURKOPP ADLER 745-35-10 S - Page 118

Programming
116 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Set corner knife correction seam begin./seam end
Fig. 98: Set corner knife correction seam begin./seam end
Information
The arrows in the left half of the display indicate the correction direction:
Seam beginning
Correction outward
Correction inward
Seam end
Correction inward
Correction outward
Corner knife options (Without corner knife, Straight pocket, Straight/Slanted
pocket) must be set in the Machine configuration ( p. 137).