DURKOPP ADLER 745-35-10 S - 7.2 Setting up the Sewing Unit

Setup
212 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
7.2 Setting up the sewing unit
7.2.1 Transport
7.2.2 Lifting the sewing unit
Fig. 180: Lifting the sewing unit
Important
When lifting the stand without castors, ONLY use a lifting carriage or forklift.
WARNING
Risk of injury due to incorrect transport!
Crushing.
Do NOT lift the sewing unit at the tabletops.
ALWAYS use lifting carriage or forklift.
WARNING
Risk of injury due to unstable footing!
Crushing.
Before commissioning the sewing unit, screw out
the stand feet until a secure footing is achieved.