Setup
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 221
7.3.5 Mounting the table extensions (additional equipment)
Storage table (small, slanted)
Fig. 189: Storage table (small, slanted)
To mount the storage table (small, slanted):
1. Insert the striker (2) into the stand brace (1).
2. Slightly fasten the mounting bracket (4) to the striker (2) using the
screws (3) (4x).
3. Align the table extension (5) with the height of the tabletop.
4. Tighten the screws (3).
Storage table (large)
Fig. 190: Storage table (large)
To mount the storage table (large):
The fastening of the large storage table is identical to the fastening of the
slanted table above.
(1) - Stand brace
(2) - Striker
(3) - Screws
(4) - Mounting bracket
(5) - Table extension
To Next Page
Loading...
