Maintenance
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 203
Fig. 174: Cleaning
Check and clean daily
• Use a compressed air gun to clean the areas of hook (2) and (3).
• Clean the lenses of light barriers (1) and (4) at the remaining thread
monitor with a soft cloth every time you change the bobbin.
• To clean the filter ring (6) at the vacuum valve (5): Blow out the filter
using a compressed air gun.
6.2 Lubricating
(1) - Light barrier
(2) - Hook
(3) - Hook
(4) - Light barrier
(5) - Vacuum valve
(6) - Filter ring
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash the
affected areas thoroughly.
NOTICE
Property damage from incorrect oil!
Incorrect oil types can result in damage to the machine.
Only use oil that complies with the data in the instructions.
To Next Page
Loading...
