DURKOPP ADLER 745-35-10 S - Assembling the Machine Parts Removed for Shipping; Assembling the Thread Reel Holder

Setup
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 217
7.3 Assembling the machine parts removed for shipping
7.3.1 Assembling the thread reel holder
Fig. 185: Assembling the thread reel holder
To assemble the thread reel holder:
1. Insert the thread reel holder (3) into the hole (1) in the tabletop and
assemble it with a nut below the tabletop.
2. Mount and align the reel plate (2) and the unwinder arms (4) as shown
in the figure.
(1) - Hole
(2) - Reel plate
(3) - Thread reel holder
(4) - Unwinder arms
①
②
③
④