DURKOPP ADLER 745-35-10 S - Bundle Clamp

Operation
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 47
4.19.5 Bundle clamp
The bundle clamp including rest table are suitable for the production of
trousers. The bundles are placed on the table and clamped in the bundle
clamp. After sewing they are removed with the roll-off device or the blow-
out device and descend while being held by the bundle clamp.
Information
A smoother device can be used to optimize the bundle array (special man-
ufacturing, available on request).
Fig. 37: Bundle clamp
To operate the bundle clamp:
1. Press the pedal (2) and hold it down.
 The bundle clamp (3) opens.
CAUTION
Risk of injury from moving parts!
Crushing.
NEVER reach between the arms of the bundle
clamp.
(1) - Transport rollers
(2) - Pedal
(3) - Bundle clamp
(4) - Table extension
①
②
③
④