Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 143
Set light barrier scan
The display switches to Light barrier scan:
Fig. 118: Set light barrier scan
To set the light barrier scan:
1. Press the desired button.
The settings for the left and the right light barrier can be configured
separately.
Information
You can configure no more than 2 light barriers at a time.
The automatic slant scan (3) is only available for the 745-35-10 A.
It is only intended for the left side and for jacket processing.
(1) - Light barrier scan Off
(2) - Flap scan with 1 light barrier left/right
(3) - Flap scan with 2 light barriers
(automatic slant scan)
To Next Page
Loading...
