Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 189
Init. parameters
Important
The Parameter init. menu is protected with a password. You use this
menu to adjust basic machine parameters. The password is 25483.
The display switches to Init. parameters.
Fig. 159: Init. parameters
To initialize the parameters:
1. Press the desired button.
2. Press OK to reset the values to their factory settings.
3. Press Cancel to cancel the initialization.
Symbols Meaning
Initialize machine configuration
• The machine parameters are reset to the value they
were set to when the machine was delivered
Initialize global parameters
• The global parameters are reset to the value they were
set to when the machine was delivered
Initialize all seam programs
• All seam programs are reset to the value they were set
to when the machine was delivered
Initialize all sequences
• All stored sequences will be lost
• All sequences are reset to the value they were set to
when the machine was delivered
Initialize RAM
• All settings are reset to the value they were set to when
the machine was delivered
To Next Page
Loading...
